ANALISA KESEHATAN DAN KESELAMATAN KERJA (K3) MENGGUNAKAN METODE HAZARD IDENTIFICATION RISK ASSASSEMENT AND RISK CONTROL (HIRARC) PADA PEMBANGUNAN GERBANG BANYURAN TANJUNG JATI UNIT 5 DAN 6 DI PT. SUPRACO INDONESIA

  • vaizah nur universitas bojonegoro
  • Faisal ashari universitas bojonegoro
Keywords: HSE, sistem manajemen K3, metode hazard identification risk assessment and risk control

Abstract

HSE is a system that must be owned by every company to ensure that operational activities carried out do not harm anyone. HSE is also known as K3, namely occupational health and safety. HSE itself stands for health, safety and environment. In order to achieve the objectives of the K3 program, various elements and resources need to be used, so that in the application of K3 it needs to be organized, and regulated into a K3 management system (SMK3). This study uses the Hazard Identification Risk Assessment and Risk Control (HIRARC) Method is a series of hazard identification processes in routine and non-routine activities. HIRARC is an effort to prevent and reduce the potential for work accidents, avoiding and minimizing risks that occur appropriately by avoiding and minimizing the risk of work accidents and controlling them in order to carry out the process of activities so that the process becomes safe. Hazard identification, risk assessment and control are part of the risk management system which is the basis of the Occupational Health and Safety Management System (SMK3), which consists of hazard identification, risk assessment and risk control.

References

A. Anggara, “Analisis Keselamatan Dan Kesehatan Kerja (K3) Menggunakan Metode Hazard and Operability Pada Bagian Produksi Di Pt Wahana Lestari Makmur Indralaya,” 2019.

ricko aditya Pamungkas, “KERJA PADA PT KA PROPERTI MANAJEMEN Disusun Oleh : Ricko Adhitya Pamungkas INSTITUT INFORMATIKA DAN BISNIS PENERAPAN SISTEM KESELAMATAN DAN KESEHATAN KERJA ( K3 ) PADA PT . KA PROPERTI MANAJEMEN AREA,” 2020.

A. S. Wulandari, Penerapan Metode Hirarc (Hazard Identification, Risk Assessment and Risk Control) Pada Proyek Wika Tower Jakarta Timur Pt Wijaya Karya (Persero). 2015.

Hikmatunnazira and R. Islamiyah, “Analisis Bahaya Dan Upaya Pencegahan Kecelakaan Kerja Pada Departement Produksi Area Iii Pt Petrokimia Gresik,” Univ. Int. Semen Indones. Gresik, vol. 1, no. 1, 2021.

A. A. CHOLIL, S. SANTOSO, T. R. SYAHRIAL, E. C. SINULINGGA, and R. H. NASUTION, “Penerapan Metode Hiradc Sebagai Upaya Pencegahan Risiko Kecelakaan Kerja Pada Divisi Operasi Pembangkit Listrik Tenaga Gas Uap,” J. Bisnis dan Manaj. (Journal Bus. Manag., vol. 20, no. 2, pp. 41–64, 2020, [Online]. Available: https://jurnal.uns.ac.id/jbm/article/view/54633

F. Ramadhan, “Analisis Kesehatan dan Keselamatan Kerja (K3) menggunakan metode Hazard Identification Risk Assessment and Risk Control (HIRARC),” Semin. Nas. Ris. Terap., no. November, pp. 164–169, 2017.

Fabiana Meijon Fadul, “Analisa potensi bahaya pada tahapan proses pengecoran logam menggunakan metode hirarc,” 2019.

A. R. Baraka, “Gambaran Perilaku Keselamatan dan Kesehatan Kerja Pada Pekerja di PT PP (Persero) Tbk Proyek Pemabangunan Paket 4 Gedung APSLC, DLC, TILC, dan FRC Universitas Gadjah Mada Yogyakarta,” FKM Univ. Ahmad Dahlan, pp. 1–59, 2020.

Published
2023-09-19
How to Cite
[1]
vaizah nur and F. ashari, “ANALISA KESEHATAN DAN KESELAMATAN KERJA (K3) MENGGUNAKAN METODE HAZARD IDENTIFICATION RISK ASSASSEMENT AND RISK CONTROL (HIRARC) PADA PEMBANGUNAN GERBANG BANYURAN TANJUNG JATI UNIT 5 DAN 6 DI PT. SUPRACO INDONESIA”, JTMSI, vol. 2, no. 2, pp. 62-70, Sep. 2023.